As a waste tire processing equipment, the tire shredder blade may wear out or passivate after a period of use during the production process.At this time, it is necessary to grind the blade to make it sharp again.
The grinding of shredder blades is somewhat different from that of other blades. Generally, blades are ground on the flat or cutting edge using a grinder, but due to the special structure of shredder blades, the design of the multi-claw blade makes it impossible for a grinder to grind them. Single grinding of the blade's flat surface can result in excessive gaps between the blades, which can seriously affect their use.
The wear of the blade is mainly on the claw, and the easiest way to repair it is to use a polisher to polish the inside of the cutting edge until it is sharp.Here, some people may ask: to what extent should it be polished?The simplest and most effective method is to polish it according to the original spare blade.It is important to polish along the arc of the claw and make sure it is perpendicular to the plane of the tire shredder blade, so that the loss of the original blade body will be minimal.
The blade is the key to the operation of the equipment, and the quality of the blade is the key to determining its service life. Therefore, attention should be paid to the selection of the blade first, and strict control should be exercised on the quality of the blade. Secondly, maintenance is important.Check whether the lubricating oil of the reducer and the butter of the coupling are insufficient, and ensure that the blade does not get stuck during operation. Regular cleaning and maintenance of the equipment can effectively protect the equipment and improve the efficiency of the shredder.
For users who use shredding equipment, the blades of the shredder are crucial.If the shredder blades wear out badly, they can only be replaced with a set of shredder blades.
